| Components For Small Veriac |
| |
4/8 Base Plate (In Special grade Thermoplastic):
Made out of filled Polyamide Thermoplastic which is very tough & absorb the shock due to its inherent qualities. There by 80% of breakage is avoided appropriate base support are incorporated in the item. It can easily bare to weight of 10 Amp. Coil. |
| |
|
|
|
| |
| • Brush Arm Bush 28 Amp. |
• Brush Arm Bush 15 Amp. |
| • Brush Arm Bush 4/8 Amp. |
| |
|
|
|
| |
| |
| • Base Bush 5/8 (25/27 mm O.D.) |
| |
| |
| • Base Bush 3/8 |
Used for Vriac main shaft rotational movement. |
| 1. |
Made of :- Pure Polyamide Thermoplastic. |
| 2. |
Specifications :- 3/8”ID & 5/8”ID. |
|
|
|
| |
| |
| |
• 28 Amp. Packing (Thin)
• 28/40 Amp. Packing (Thick) |
Purpose : Made out of filled Polyamide Thermoplastic is it used to isolate coil from the base. used above 28 amp.variac. |
|
|
|
|
| |
| |
| |
• Small Stoper |
Made out of Filled Polyamide Thermoplastic. It is used as a stopper in Variac above 15 amp. |
| |
|
|
|
| |
| |
• 2 Amp Ring (Base)
• 4/8 Amp Base Ring
• 15 Amp Base Ring |
Made out of . of filled Polyamide Thermoplastic is it used to isolate coil from the base. |
| |
|
|
|
| |
| |
• 28 amp. Stopper |
Made out of Filled Polyamide Thermoplastic. It is used as a stopper in Variac above 15 amp. |
| |
|
|
|
| |
• 28/40 Amp Packing
• Gland 4/8 Amp.
• Stoper 8 Big veriac |
| |
| |
| Components For Stabilizer |
| |
| Limit Switch Operating Plate :- |
 |
| 1. |
Product Info :- Operating limit switch veriac. |
| 2. |
Made Of :- Filled Thermo-Plastic |
|
|
| |
 |
| Cam (3/8) & (5/8) Inch ID :- |
| 1. |
Product Info :- For operating limit switch for above small Variac |
| 2. |
Made Of :-Engineering plastic Thermo-Plastic |
| 3. |
Application :- For operating the limit switch. Use in Servo Stabilizer |
| 4. |
Other Specification :- Hole Diameter 3/8 inch with 3mm threading insert. Hole Diameter 5/8 inch with 4mm threading insert. |
|
|
| |
 |
| Limit Switch Mounting Plate :- |
| 1. |
Product Info :- Mounting of limit switch on plate. (Isolation of Limit switch) |
| 2. |
Made Of :- Filled Thermo-Plastic . |
| 3. |
Application :- For mounting limit switch. Use in Servo Stabilizer. |
| 4. |
Other Specification :- Fixing hole are provided on the plate for mounting the limit switch |
|
|
| |
